The laser marking machine with turntable GYRUS is designed to identify workpieces in large batches.
It is equipped with fiber 1060 - 1085 nm laser sources from 20W to 100W power, with Q-switched or MOPA technology, allowing the most suitable configuration for different needs.
It is suitable to work on every kind of metals and a lot of types of plastic.
With this device is possible to create linear and circular alphanumeric texts, logos, barcodes and 2D codes (Data Matrix and QR code).
It allows to carry out the workpiece loading / unloading on “masked” time, during the marking phase.
In the standard equipment of this marking machine there are: motorized Z axis, illuminated worktop and the fume evacuation set-up.
The laser GYRUS if requested can be provided with a UR collaborative robot with a playload of 3 or 5 Kg.
The optical unit of this device has high performance and low consumption that guarantee high density of energy that allow to have a permanent marking in a short time.
The positioning of the markings is facilitated by the integrated red-pointer.
GYRUS marking machine with rotary table
GYRUS rotary table laser marking system, fiber laser source with 1064 nm wavelength and 20W, 30W or 60W laser power
Feature and advantage:
112 x 112 mm (lens F163)
174 x 174 mm (lens F254)
Hardware integrated inside the machine
USB, RS-232, TCP/IP (optional) connections
Stand alone system
Possibility of remote assistance
Easy to use and program
Import of BMP, DXF, PLT
Laser safety class 1 cabin
Long laser lifetime
1040 x 1610 x 650 mm