Marking area 50 x 30 mm
The marking machine for integration i50 has been studied with the purpose of being easily integrated in other devices, production lines or team of robots.
The marking head has small dimensions and it needs low maintenance.
The marking area of 50 x 30 mm allows to insert easily several lines of code on the component.
With this model is possible to mark on every kind of materials, from plastic to hardened steel (up to 62HRC of superficial hardness).
The mechanics of this device is contained in a resistant aluminium case and the flexible leather bellows (optional) allow a continuous and intense use.
The integration take place through integrated MODBUS-RTU, 24 VDC digital I/O port or ASCII protocol on serial port RS-232. Ethernet an Profinet connections are optional.
Marking machine for integration DOT6-i50
DOT6-i50 marking machine for integration is easy to use and it is ideal for the identification of components inside auotomatized sistem.
It is equipped with an electromagnetic stylus with a 4 mm diameter that use a drive frequency up to 100 Hz. Thanks to the small dimensions it is the best solution for the user who needs to identify bulky components that don’t need surface treatment (painting, galvanization).
Feature and advantage:
Separated hardware with robotic cable
MODBUS RTU, ASCII protocol and 24 VDC digital I/O
USB, RS-232, TCP/IP (optional) connections
Easy to use and program
Possibility of remote assistance
Identify PC Software included
Import of BMP, DXF, PLT
128 x 86 x 297 mm